Miele WMH122 WPS Operating Instructions Manual Download Page 93

Page: 93 / 104

Settings

Changing the detergent type

Dosage amounts for Miele products
(e.g. UltraColor, Miele fabric condi-
tioner) are pre-set for water hardness
range II (



Detergent / amount





Touch the

sensor.

Compartment 1



Touch the

sensor.

Miele UltraPhase 1







Select the detergent you want using
the



and



sensors and confirm

your selection with the

sensor.

Miele UltraColor





Dosage - C. 1

105



Confirm the amount of detergent with
the

sensor or change this using

the



and



sensors.



Settings for compartment 2 rejected



Confirm the message with the

sensor.

Compartment 2



Touch the

sensor.





Not defined



Select the detergent you want using
the



and



sensors and confirm

your selection with the

sensor.

Miele conditioner





Dosage - C. 2



Confirm the amount of detergent with
the

sensor or change this using

the



and



sensors.

The electronics are set for the new de-
tergent.

Maintenance

The washing machine has a cleaning
programme for cleaning the TwinDos
system containers and the hoses in-
side the washing machine.

The TwinDos system must be cleaned if
the system has not been used for a
long period of time or if you are chan-
ging brand of liquid detergent or fabric
conditioner. See "Cleaning and care -
Cleaning the TwinDos system" for more
details.

Summary of Contents for WMH122 WPS









































































































Search results

Summary of Contents for WMH122 WPS

Reviews:

Related manuals for WMH122 WPS

Brands by name

Popular brands

Miele WMH122 WPS, Operating Instructions Manual

Search results

Summary of Contents for WMH122 WPS

Reviews:

Related manuals for WMH122 WPS

Brands by name

Popular brands