Miele WMH122 WPS Operating Instructions Manual Download Page 25

Page: 25 / 104

2. Select a programme

Switch on the washing ma-
chine



Press the



button.

Programme selection

A. Selecting a programme via the
programme selector:



Turn the programme selector to the
required programme.

The load for the programme selected
will appear in the display. This will then
be replaced by the standard display.

B. Selecting a programme using the
programme selector at the "Further
programmes" position:



Turn the programme selector to

Fur-

ther programmes

The following will appear in the display:

Automatic plus





Touch the





sensor until the

programme you want appears in the
display.



Confirm the programme with the

sensor.

The maximum load for the relevant pro-
gramme will appear in the display. Pre-
set programme parameters will be dis-
played depending on the programme
selected.

Summary of Contents for WMH122 WPS









































































































Search results

Summary of Contents for WMH122 WPS

Reviews:

Related manuals for WMH122 WPS

Brands by name

Popular brands

Miele WMH122 WPS, Operating Instructions Manual

Search results

Summary of Contents for WMH122 WPS

Reviews:

Related manuals for WMH122 WPS

Brands by name

Popular brands