Miele WMH122 WPS Operating Instructions Manual Download Page 18

Page: 18 / 104

Before using for the first time



Press the TwinDos access panel.

The panel will spring open.



Drop the panel down.



Push the

UltraPhase 1

cartridge into

compartment 1

and the

UltraPhase 2

cartridge into

com-

partment 2

, until they lock into posi-

tion.

The TwinDos system is now ready for
use.

Removing the protective foil
and stickers



Remove

– the protective foil from the door.

– any stickers from the front and the

lid.



Please do not remove any labels

(e.g. the data plate), visible when you
open the door.

This washing machine has undergone
a complete functional test at the fact-
ory and there will be some residual
water in the drum from this process.

Summary of Contents for WMH122 WPS









































































































Search results

Summary of Contents for WMH122 WPS

Reviews:

Related manuals for WMH122 WPS

Brands by name

Popular brands

Miele WMH122 WPS, Operating Instructions Manual

Search results

Summary of Contents for WMH122 WPS

Reviews:

Related manuals for WMH122 WPS

Brands by name

Popular brands