6. Start the programme - the end of a programme
33
Start the programme
Touch the flashing
Start/Stop
sensor.
The door will lock (the
will appear in
the display to show this) and the pro-
gramme will start.
If a delay start time has been selected,
then this will count down in the display.
At the end of the delay start time or im-
mediately after the programme has star-
ted (if no delay start time has been se-
lected), the programme duration will ap-
pear in the display.
The programme sequence is also
shown in the display. The washing ma-
chine lets you know which section of
the programme has been reached.
At the end of a programme
The door is still locked during the anti-
crease phase and the following will ap-
pear alternately in the display:
Anti-crease/Finish
and
Press Start/Stop
Press the
Start/Stop
button. This will
unlock the door.
Pull open the door.
Remove the laundry.
Items left in the drum could discolour
other items in the next wash or be-
come discoloured themselves.
Check that all items have been re-
moved from the drum.
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Tip:
Leave the door slightly open to al-
low the drum to dry.
Switch the washing machine off with
the
button.
If applicable, remove the used cap-
sule from the detergent dispensing
drawer.
Tip:
Leave the detergent dispenser
drawer slightly open to allow it to dry.
Summary of Contents for WMH122 WPS
Page 102: ......
