Miele WMH122 WPS Operating Instructions Manual Download Page 8

Page: 8 / 104

Warning and Safety instructions

Safety with children



Children under 8 years of age must be kept away from the wash-

ing machine unless they are constantly supervised.



Children 8 years and older may only use the washing machine un-

supervised if they have been shown how to use it safely and recog-
nise and understand the consequences of incorrect operation.



Children must not be allowed to clean or maintain the washing

machine unsupervised.



Please supervise children in the vicinity of the washing machine

and do not let them play with it.

Technical safety



Please observe the instructions in "Installation and connection"

and "Technical data".



Before setting up the washing machine, check it for any externally

visible damage. Do not install or use a damaged machine.



Before connecting the washing machine, ensure that the connec-

tion data on the data plate (fuse rating, voltage and frequency) match
the mains electricity supply. If in any doubt, consult a qualified elec-
trician.



Reliable and safe operation of this washing machine can only be

assured if it has been connected to the mains electricity supply.

Summary of Contents for WMH122 WPS









































































































Search results

Summary of Contents for WMH122 WPS

Reviews:

Related manuals for WMH122 WPS

Brands by name

Popular brands

Miele WMH122 WPS, Operating Instructions Manual

Search results

Summary of Contents for WMH122 WPS

Reviews:

Related manuals for WMH122 WPS

Brands by name

Popular brands