F
Add detergent
When the door is closed, the load size
indicator will be replaced with the
detergent percentage display.
Detergent
75%
A
Back
A
The percentage shown relates to the
amount of detergent recommended by
the manufacturer on the packaging.
40%
= Add slightly less than half
the amount recommended
50%
= Add half the amount
recommended
60%
= Add slightly more than half
the amount recommended
75%
= Add three quarters of
the amount recommended
100%
= the full amount of detergent
recommended
You also need to take the level of
soiling and water hardness into
account.
It is important to dispense the correct
amount because . . .
. . . too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
– Greasy particles clinging to the
laundry.
– Limescale deposits on the heater
elements.
. . . too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
– High water consumption (an
additional rinse cycle will
automatically switch in).
– A burden to the environment.
How to wash correctly
19
Summary of Contents for W 3922 WPS
Page 70: ...70 ...
Page 71: ...71 ...
Page 72: ...Alteration rights reserved 3306 W 3922 WPS M Nr 06 750 540 02 en GB ...