Miele W 3922 WPS Operating Instructions Manual Download Page 69

Page: 69 / 72

Standby display

To save energy, the display goes out
the indicator light for the

Start/Stop

button will start flashing slowly.

The display will always go out,

– if a programme is not selected within

10 minutes of the machine being
switched on.

– 10 minutes after the end of a

programme.

Pressing one of the buttons switches
the display back on again.

You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.

The standby function is switched on.
When this option is selected, the
display will go out 10 minutes after a
programme has started.

Not in current programme

(the machine is delivered with this
option selected)

The standby function is switched off.
The display will remain visible during a
programme.

Memory

If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.

When this programme is chosen again
these settings will appear in the display.

The machine is delivered with the
memory function deactivated.

A tick

will appear beside the option

to show that it has been set.

To close the Settings menu

Settings

Back

Continue

Press the right hand

button

under

Settings menu

Summary of Contents for W 3922 WPS









































































Search results

Summary of Contents for W 3922 WPS

Reviews:

Related manuals for W 3922 WPS

Brands by name

Popular brands

Miele W 3922 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3922 WPS

Reviews:

Related manuals for W 3922 WPS

Brands by name

Popular brands