Miele W 3922 WPS Operating Instructions Manual Download Page 14

Page: 14 / 72

Reminder to remove transport struts

To avoid the risk of damage, the
transport struts must be removed
before the machine is used for the
first time. See "Installation and
connection" for instructions on how
to do this.

After removing the transport struts (if
this has not already been done by
your fitter) press the right hand

button under

Running your first programme

Your machine is now ready for the first
programme to be run.

15:00

Select programme

Turn the programme selector to the

Cottons

position.

Press the

Start/Stop

button.

At the end of the programme switch
the machine off.

Before you can use the washing
machine, the load sensor has to be
calibrated to zero as you would with
bathroom scales.

Calibrating the load sensor to zero

Switch on the washing machine.

Open the drum door.

Turn the programme selector to the

Cottons

position.

Press and hold the

Load/Detergent

button pressed in until the following
message appears in the display:

Zero setting
OK

Switch off the washing machine.

The machine is now ready for use.

Before using for the first time

Summary of Contents for W 3922 WPS









































































Search results

Summary of Contents for W 3922 WPS

Reviews:

Related manuals for W 3922 WPS

Brands by name

Popular brands

Miele W 3922 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3922 WPS

Reviews:

Related manuals for W 3922 WPS

Brands by name

Popular brands