background image

The correct detergent

All modern detergents produced for automatic washing machines are suitable. Use dispensing aids,

e.g. balls, if these are supplied with the detergent. Tablets are suitable for full loads, but note that it

may be impractical to reduce tablets for smaller loads. Some tablets do not dissolve as rapidly as

others, and may not be suitable for programmes with short durations.

Do not use biological detergents on silk as the enzymes may damage the silk!

Instructions for use and recommended dosage amounts are given on the detergent packaging.

Liquid detergent should be dispensed using a ball provided by the manufacturer for programmes

without a pre-wash.

For programmes with a pre-wash you will need to purchase a special container from the Miele Spare

Parts department which sits in the main wash compartment

j

of the detergent dispenser drawer. Add

liquid detergent to this container for the main wash and to compartment

i

for the pre-wash.

All purpose detergent

for whites*

Detergent for coloured

fabrics*

Detergent for delicates

Cottons

X

X

Minimum iron

X

X

Delicates

X

Woollens

Liquid detergent for machine-washable woollens

Automatic

X

X

Shirts

X

X

Express

X

X

Denim

X

1)

Hygiene

X

Dark garments

X

1)

Curtains

X

2)

X

2)

Pillows

X

1)

X

1)

Silks

Liquid detergent for machine-washable silk and woollens

Sportswear

X

X

Outerwear

X

Proofing

Only use proofing agents which are stated by the manufacturer as being
"suitable for use on membrane textiles" as these consist of fluorochemical
compounds.

Do not use

proofing agents which contain paraffin. Add

proofing agents to compartment

§

.

Starch

Liquid starch, starch formulations, viscous liquid starch, starch

1)

Only use liquid detergent

2)

Only use powder detergent or detergent specifically designed for washing curtains

* Powder detergent, tablet detergent, liquid detergent and liquid tab detergent.

Detergent

35

Summary of Contents for W 3922 WPS









































































Reviews: