Miele W 3922 WPS Operating Instructions Manual Download Page 27

Page: 27 / 72

Shirts

cold to 60°C

Max. load 2.0 kg

Notes

–

Pre-treat collars and cuffs if necessary.

–

Wash silk garments in the

Silks

programme.

Extra options Short, Water plus, Rinse hold

Express

cold to 40°C

Max. load 3.0 kg

Fabric

Small loads of items which require freshening up and which can
be washed in a

Cottons

programme.

Extra options Water plus, Rinse hold, Extra rinse

Denim

cold to 60°C

Max. load 3.0 kg

Notes

–

Wash denim inside out.

–

Denim often contains excess dye and will run during the first
few washes. Wash light and dark coloured items separately.

Extra options Pre-wash, Soak, Short, Rinse hold

Hygiene

60°C

Max. load 6.0 kg

Fabric

Fabrics which will be in direct contact with the skin, e.g.
underwear, nappies, towelling, bed linen, pillow and mattress
covers.

Note

There is a longer temperature holding time in the main wash.

Extra options Pre-wash, Soak, Water plus, Rinse hold, Extra rinse

Dark garments

cold to 40°C

Max. load 3.0 kg

Item

Dark garments made from cotton or mixed fibres.

Note

Wash inside out.

Extra options Short, Rinse hold

Programme chart

Summary of Contents for W 3922 WPS









































































Search results

Summary of Contents for W 3922 WPS

Reviews:

Related manuals for W 3922 WPS

Brands by name

Popular brands

Miele W 3922 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3922 WPS

Reviews:

Related manuals for W 3922 WPS

Brands by name

Popular brands