Miele W 3922 WPS Operating Instructions Manual Download Page 10

Page: 10 / 72

Control panel

Start/Stop button

For starting the programme selected
and cancelling a programme once it
has started.

Display with Menu buttons

See the next pages for more
information.

button

For selecting delay start.

PC / Optical interface

This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
future.

Load/Detergent button

For calling up the load size or the
recommended amount of detergent,
and for calibrating the load size
sensor to zero.

Extra options buttons

Various extra options can be added
to the washing programmes.

Programme selector

For selecting the wash programme
and temperature for that programme.
The programme selector can be
turned clockwise or anti-clockwise.

I-On/0-Off button

For switching the machine on or off.

Door button

Opens the machine door.

Operating the washing machine

Summary of Contents for W 3922 WPS









































































Search results

Summary of Contents for W 3922 WPS

Reviews:

Related manuals for W 3922 WPS

Brands by name

Popular brands

Miele W 3922 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3922 WPS

Reviews:

Related manuals for W 3922 WPS

Brands by name

Popular brands