Miele W 3922 WPS Operating Instructions Manual Download Page 25

Page: 25 / 72

To alter delay start

You can subsequently select a later
programme end time if you wish.

Press the

button.

Delay start

9:05

from 16:16

to 18:00

Change

Delete

Use the left hand

button under

Change

to alter the time you want the

programme to end at.

To delete delay start

You can delete the delay start time and
start the selected programme straight
away.

Press the

button.

Delay start

9:05

from 16:16

to 18:00

Change

Delete

Press the right hand

button

under

Delete

The selected programme will start
straight away.

To cancel delay start

Press the

Start/Stop

button.

The following will appear in the display:

Stopped:

Cancel delay start

Continue

Confirm by pressing the right hand

button under

Now you can select a different
programme, or

Press the

Start/Stop

button to start

the programme straight away.

The actual load size can only be
determined accurately by the
machine once the programme has
started. The programme end time
may, therefore, be a bit later or
earlier than first indicated.

Delay start

Summary of Contents for W 3922 WPS









































































Search results

Summary of Contents for W 3922 WPS

Reviews:

Related manuals for W 3922 WPS

Brands by name

Popular brands

Miele W 3922 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3922 WPS

Reviews:

Related manuals for W 3922 WPS

Brands by name

Popular brands