Miele TOUCHTRONIC W 4842, Technical Information

Page: 58 / 90

Technical Information
58
W 48xx
indication.
Remedy:
See Section 040-2.3.
3.36 Maximum Spin Speed Is Not Reached
Cause:
An incorrect setting was made for Maximum spin speed program function.
Remedy:
Set the maximum spin speed to match the appliance model.
3.37 Water Path Control Unit (M24) is Not Activated as Programmed
Symptom:
The water path control unit is permanently activated in wash programs with
the
Pre-wash selection.
Cause:
In the Water valves programming function, the Valves option was selected.
Remedy:
In the Water valves programming function, set the option to Water path
control according to the appliance model.
3.38 Long Program Running Times
Cause:
In the Water plus programming function, the Additional rinse cycle option
has been selected.
Remedy:
In the Water plus programming function, set the option to Water+ .
Cause:
Child lock.
Remedy:
See Section 070-2.1.
4 Service
4.1 Programming Mode (W 4800, W 4802)
Initial requirements:
1. Install and connect the appliance correctly.
2. End the current program as well as the demo mode.
3. Open the door.
Accessing:
Note:
Access has to be completed within 10 seconds.
1. Press and hold the Start button.