Miele TOUCHTRONIC W 4842, Technical Information

Page: 39 / 90

Technical Information
39
W 48xx
2.2 Action after a Power Failure
The appliance automatically continues the program at the exact point where it
stopped when the power cut out.
2.3 Programming Functions (HY IV E)
2.3.1 Water Plus
Setting for Water Plus .
When Water Plus is selected, the water level is raised and/or an additional
rinse cycle is carried out.
2.3.2 Gentle Cycle
Setting for gentle cycle.
Selecting the gentle cycle reduces the drum movement. Fabrics are washed
gently.
For lightly soiled laundry.
2.3.3 Suds Cooling
At active suds cooling, in programs 167°F and higher, cold water is taken in
at the end of the main wash cycle to cool the suds.
This reduces the danger of scalding by draining suds, and it protects drain
pipes that are not high-temperature resistant.
2.3.4 Memory
When the memory function is activated, the program settings (made at the
start of a program) and any special settings (such as temperature and spin
speed) are saved. When the same program is selected again, these special
settings are automatically activated.
2.3.5 Buzzer
Activate the buzzer to sound at program end and during rinse stop, and set
the buzzer tone.
Note:
In case of a fault, the buzzer also sounds even if it has not been activated.
2.3.6 Language
The active language is used for the operating, programming and service
modes.
2.3.7 Contrast
The contrast of the display can be adjusted to suit the existing lighting
conditions.