Miele TOUCHTRONIC W 4842, Technical Information

Page: 59 / 90

Technical Information
59
W 48xx
2. Close the door.
3. Release the
Start button as soon as the “End” LED comes on.
4. Press Start 5 times; hold on the 5th time until the “Start” LED flashes
rapidly (5 flashes per second).
Acknowledgement indicator:
“Start” LED flashes rapidly (5 flashes per second).
If accessing is not successful, the control reverts automatically to
Select
program .
Options:
1. To select a program function: Press the Buzzer button. The program
function is indicated by the flashing of the “Buzzer” LED.
2. To select an option: Press Start . The selected option is indicated by
the flashing of the “Prewash” LED.
Warning!
For the appliance to function properly, specific options for the country it is
operating in have to be selected.
The service department software has to be adapted.
Note:
Default settings are shown in bold .
Programming function “Prewash” LED
“Buzzer” LED Long Short Option Long Short
Reset ; refer to Section 070-
2.3.23.
- 1
Delivery status - 1
Adapted options - 0
Water Plus (increase in
water level/extra rinse
cycle); see Section 070-
2.3.1.
- 2
Water+: Increase in water level in soak,
pre-wash, main wash and in the rinse
cycles in certain programs.
- 1
Extra rinse cycle: Additional rinse cycle
in certain programs.
- 2
Water+ and extra rinse : Increase in
water level in soak, pre-wash, main
wash and in the rinse cycles in certain
programs, as well as additional rinse
cycle in
Cottons very hot program.
- 3
Always Gentle action ; refer
to Section 070-2.3.2.
- 3
Off: Not activated. - 0
On : Activated. - 1
Suds cooling ; refer to
Section 070-2.3.3.
- 4
Off : Not activated.
- 0
On: Activated. - 1
Soak duration
- 5
2 hours
- 1
1.5 hours - 2
1 hour - 3
0.5 hours - 4
Buzzer ; refer to Section
070-2.3.5.
- 6
Off - 1
Normal - 2
Loud - 3