background image

Program chart

34

Silks

Cold to 86°F/30°C

Max. load 6.6 lbs (3 kg)

Items

Silks and all hand-washable textiles which do not contain wool

Tip

– Observe the instructions on the wash care label.

– Place tights, bras, etc., in a washing bag.

600 rpm

Extras: Rinse plus, Rinse hold

Rinses: 2

Separate rinse

Max. load 17.6 lbs (8 kg)

Items

Items which only need to be rinsed and spun

Tip

– Observe the spin speed for items which crease easily.

1,400 rpm Extras: Rinse plus, Rinse hold

Rinses: 2

Starch

Cold to 104°F/40°C

Max. load 8.8 lbs (4 kg)

Items

Table cloths, napkins, and workwear that need starching

Tip

– Laundry that is to be starched should be washed but not treated

with fabric softener.

– Observe the spin speed for items which crease easily.

1,200 rpm

Rinses: 1

Clean machine

158°F/70°C

No load

For cleaning the suds container and the drainage system.

– Add universal detergent to the 

 compartment.

– Use the 

Clean machine

 program regularly if you frequently use

disinfection programs.

Drain/Spin

Max. load 17.6 lbs (8 kg)

Tip

– Make sure you select the appropriate spin speed.

– Drain only: select 0 rpm for the spin speed.

– Select the Rinse Plus extra option for one rinse.

1,500 rpm Extras: Rinse plus

Summary of Contents for PWM 906





































































































Reviews: