Miele PWM 906 Operating And Installation Instructions Download Page 16

Page: 16 / 100

Operating the washing machine

Operating a launderette
machine

The entry menu will vary depending on
the programming status (see “Controls”
under “Supervisor level”).

Shortcuts are the easiest way to
operate the machine. Users are unable
to change pre-set programs.

Laundromat, basic (4 programs)



11:02





Whites

Woollens

Whites

Normal

Help





4 pre-set programs are available. These
cannot be changed by the user.

Laundromat, ext. (12 programs)



11:02







Whites

Normal

Whites

Help

Further



Up to 12 pre-set programs are
available. The first 3 programs can be
selected directly. The remaining
programs are selected via another list.
These cannot be changed by the user.

Summary of Contents for PWM 906





































































































Search results

Summary of Contents for PWM 906

Reviews:

Related manuals for PWM 906

Brands by name

Popular brands

Miele PWM 906, Operating And Installation Instructions

Search results

Summary of Contents for PWM 906

Reviews:

Related manuals for PWM 906

Brands by name

Popular brands