Miele PWM 906 Operating And Installation Instructions Download Page 31

Page: 31 / 100

Timer

With the Timer function, you can select
the time until the start of a program, the
start time or end time of a program.

Setting the timer



Touch the

 Timer

sensor control.



Select the

Finish at

Start in

, or

Start

option.



Set the hours and the minutes and
confirm your entry with the

sensor

control.

Changing the timer

The selected delay start time can be
changed before the program starts.



Touch the





, or



sensor

control.



If required, change the specified time
and confirm with the

sensor

control.

Deleting the timer

The selected delay start time can be
cancelled before the program starts.



Touch the





, or



sensor

control.

The selected delay start time will
appear in the display.



Touch the

Delete

sensor control.



Confirm with the

sensor control.

The selected delay start time is deleted.

Starting the timer



Touch the

Start/Stop

sensor control.

The door will lock and the time until the
program starts will appear in the
display.

After the program start, the selected
delay start time can only be changed
or cancelled by interrupting the
program.

The program can be started
immediately at any time.



Touch the

Start immediately

sensor

control.

Summary of Contents for PWM 906





































































































Search results

Summary of Contents for PWM 906

Reviews:

Related manuals for PWM 906

Brands by name

Popular brands

Miele PWM 906, Operating And Installation Instructions

Search results

Summary of Contents for PWM 906

Reviews:

Related manuals for PWM 906

Brands by name

Popular brands