Miele PWM 906 Operating And Installation Instructions Download Page 19

Page: 19 / 100

Initial commissioning

Setting the time

Time



12 00

11 59

10 58

01 01

02 02



Place your finger on the number that
you want to change and move your
finger in the direction you want.



Confirm with the

sensor control.

The display will change to the next
setting.

Selecting program packages

You can select various programs from
the program packages. Any programs
already active are highlighted in orange.

11:02

Normal

Sportswear

Sneakers

Sport

Microfibre

Hard items

Program packages

Label

Sport



Scroll right until you reach a program
that is not highlighted in orange.



Touch the sensor control for the
required program.

The selected program is highlighted in
orange.



You can select further programs.

Useful tip:

You can disable a selected

program by touching the program's
sensor control again.
Exception: the

Cottons



and

Cottons Pro

programs cannot be

disabled.



If you do not want to select any more
programs, confirm with the

sensor control.

The display will change to the next
setting.

Summary of Contents for PWM 906





































































































Search results

Summary of Contents for PWM 906

Reviews:

Related manuals for PWM 906

Brands by name

Popular brands

Miele PWM 906, Operating And Installation Instructions

Search results

Summary of Contents for PWM 906

Reviews:

Related manuals for PWM 906

Brands by name

Popular brands