Miele PWM 906 Operating And Installation Instructions Download Page 25

Page: 25 / 100

4. Selecting program settings

Selecting a load

To enable load-specific dispensing,
you can specify the load for some
programs.



Touch the

Weight

sensor control.



Enter a valid value for the load
quantity.

The display will switch to the

Overview

menu.

Selecting a temperature

You can alter the pre-set temperature
of a wash program.



Touch the

Temperature

sensor control.



Select the desired temperature.

The display will switch to the

Overview

menu.

Selecting a spin speed

You can alter the pre-set spin speed of
a wash program.



Touch the

Spin speed

sensor control.



Select the desired spin speed.

The display will switch to the

Overview

menu.

Selecting Extra options

You can select Extra options for some
wash programs.



Touch the

Extras

sensor control.



Select one or more Extra options.



Confirm with the

sensor control.

The display will switch to the

Overview

menu.

See “Extras” for further information.

Activating CapDosing

You can use CapDosing for some
wash programs.



Touch the

CapDosing

sensor control.

The types of caps which can be used
with the program will appear in the
display.



Select the type of cap you want.

CapDosing is now active.

The display will switch to the

Overview

menu.

See “5. Adding detergent –
CapDosing” for more information.

Summary of Contents for PWM 906





































































































Search results

Summary of Contents for PWM 906

Reviews:

Related manuals for PWM 906

Brands by name

Popular brands

Miele PWM 906, Operating And Installation Instructions

Search results

Summary of Contents for PWM 906

Reviews:

Related manuals for PWM 906

Brands by name

Popular brands