Supervisor level
82
Low water pressure
If the water pressure is below 100 kPa
(1 bar), the programme will be can-
celled and the fault message
Check
water inlet
will appear.
If the on-site water pressure cannot be
increased, activating the setting
Low wa-
ter pressure
will prevent the programme
from being cancelled.
Factory default: Off
Empty sensor
A siphon contact can be used to de-
tect whether external detergent con-
tainers are empty. A message appears
if a container is empty.
– Off (factory default)
The Empty sensing function is
switched off.
– Normally open contact
The siphons are equipped with a nor-
mally open contact.
– Normally closed contact
The siphons are equipped with a nor-
mally closed contact.
Early warning counter
An internal counter reports when an
external dispenser container is almost
empty. The counter in question then
has to be reset.
Water level Cottons
You can increase the water level for
the main wash in the
Cottons
pro-
gramme.
– + 0 mm wc (factory default)
– + 10 mm wc
– + 20 mm wc
– + 30 mm wc
Water level Minimum iron
You can increase the water level for
the main wash in the
Minimum
iron
programme.
– + 0 mm wc (factory default)
– + 10 mm wc
– + 20 mm wc
– + 30 mm wc
Cottons Pre-wash temp
You can select the temperature for the
pre-wash in the
Cottons
programme.
– 30 °C (factory default)
– 35 °C
– 40 °C
– 45 °C
