Before using for the first time
23
Removing the transit bars
The display will remind you to remove
the transit bars.
Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing ma-
chine and to adjacent furniture or ap-
pliances.
Remove the transit bars as described
in “Installation and connection”.
Confirm that the transit bars have
been removed with the
OK
sensor.
Continue setting up as described in the Op-
erating Instructions
appears in the dis-
play.
Confirm the message with the
OK
sensor.
Completing commissioning
To complete commissioning, the
Col-
oured items 60 °C
programme must be
run without laundry and without deter-
gent.
If the power is interrupted prior to the
start of the first wash programme (e.g.
if the machine is switched off with the
button), the initial commissioning
process can be completed again.
Once a wash programme has been
running for over 20 minutes, the initial
commissioning process does not have
to be performed again.
Open the stopcocks.
Turn the programme selector
to
Coloured items 60 °C
.
1600
Coloured items
60°C
h
0:59
Touch the
Start/Stop
sensor.
When the programme has finished, your
machine is ready for use.
If you have activated disinfection
programmes, you must complete the
Thermal disinfection
programme as
the first programme; make sure you
use a suitable detergent but do not
load the machine.
