Miele PWM 507 Hygiene Operating And Installation Instructions Download Page 81

Page: 81 / 92

Supervisor level

Pre-wash water

You can select the water type for the
pre-wash.

– Cold

Only cold water is used for the pre-
wash.

– Hot

Hot water is also added for the pre-
wash.
Hot water can only be added if the
wash temperature is above 30 °C.

Main wash water

You can select the water type for the
main wash.

– Cold

Only cold water is used for the main
wash.

– Hot

Hot water is also added for the main
wash.
Hot water can only be added if the
wash temperature is above 30 °C.

Programme durations will be longer if
the machine is not connected for hot
water; this may mean that the “Time
left” display is incorrect.

First rinse water

You can select the water type for the
first rinse in some programmes.

– Cold (factory default)

Only cold water is used for the first
rinse.

– Hot

Hot water is also added for the first
rinse.

Final rinse water

You can select the water type for the
last rinse in some programmes.

– Cold (factory default)

Only cold water is used for the final
rinse.

– Hot

Hot water is also added for the final
rinse (only possible for programmes
with a temperature of at least 60 °C).

Summary of Contents for PWM 507 Hygiene





























































































Search results

Summary of Contents for PWM 507 Hygiene

Reviews:

Related manuals for PWM 507 Hygiene

Brands by name

Popular brands

Miele PWM 507 Hygiene, Operating And Installation Instructions

Search results

Summary of Contents for PWM 507 Hygiene

Reviews:

Related manuals for PWM 507 Hygiene

Brands by name

Popular brands