MAINTENANCE
REV.0.01_COD.650184_A4
Page 55
CLEANING THE SPRAY ARMS
Responsible
person: User
Frequency: Weekly
PROCEDURE:
Clean the spray arms as follows:
Open the wash cabinet door and remove the filter insert.
Warning:
Hot surfaces
Unscrew the fastening pins of the two spray arms and remove the spray arms.
Unscrew the seal on the rear of the nozzle and remove it.
Remove any incrustations from the washing nozzle and clean using an appropriate detergent.
Replace the end caps.
Make sure the seal is properly positioned and in good condition. Replace it if necessary.
Reinstall the spray arms.
Secure with the fastening pins.