![background image](http://html.mh-extra.com/html/miele/plw-6111/plw-6111_operating-instructions-manual_1793072009.webp)
PRODUCT INFORMATION
REV.0.01_COD.650184_A4
Page 9
2.2
Safety instructions and warnings
This machine complies with all statutory safety requirements. Improper use can lead to personal
injury and damage to property.
Read the operating instructions carefully before using this machine. This will prevent both
personal injury and damage to the machine.
Keep these instructions in a safe place where they are accessible to users at all times.
Correct application
Use of the machine is only approved for the applications stated in the operating instructions.
Conversions, modifications, and any other use are not permitted and could be dangerous.
The cleaning and disinfection processes are only designed for laboratory glassware and utensils
which are designated as reprocessable by the manufacturer. The information provided by the
manufacturer of the wash items must be observed.
Miele cannot be held liable for damage resulting from incorrect or improper use or operation.
This machine is intended for indoor use in a stationary location only.
Danger of injury
Please pay attention to the following notes to avoid injury
The machine may only be installed, commissioned, repaired, and maintained by Miele Service
or a suitably qualified service technician. A Miele service contract is recommended to avoid
downtimes and helps to optimize operating parameters. Incorrect repairs can cause considerable
danger to users.
Do not install the machine in an area where there is any risk of explosion or of freezing
conditions.
In order to reduce the risk of water damage, the area around the machine should be limited to
furniture and fittings that are designed for use in commercial environments.
Some metal parts pose a risk of injury/being cut. Wear cut-resistant protective gloves when
transporting and setting up the machine.
If the machine is built under a countertop, it must only be installed under a continuous
countertop run which is firmly secured to adjacent units to improve stability.
The electrical safety of the machine can only be guaranteed when correctly grounded. It is
essential that this standard safety requirement is observed and regularly tested. If in any doubt,
please have the electrical installation inspected by a qualified electrician. Miele cannot be held
liable for the consequences of an inadequate grounding system (e.g., electric shock).
A damaged or leaking machine can pose a threat to your safety. Always switch off a damaged
or leaking machine immediately and contact Miele Service.
Machine operators should be instructed on the use of the machine and trained regularly.
Untrained personnel must not be allowed access to the machine or its controls.
Only use process chemicals which have been approved by their manufacturer for the relevant
application. The manufacturer of the process chemicals is liable for any negative influences on the
material of the wash items and the machine.
Exercise caution when handling process chemicals. Some chemicals may be caustic,
irritating, and toxic.
The relevant safety regulations and safety data sheets issued by the process chemical
manufacturers must be observed.
Wear gloves and protective goggles.
The machine is only intended for use with water and suitable process chemicals. The use of
organic solvents or inflammable liquids is not permitted.