CLOCK
REV.0.01_COD.650184_A4
Page 44
11.
CLOCK
The controls have a real-time clock.
Times are saved for historical data.
12.
AUDIBLE SIGNAL
The audible signal sounds when a button is pressed. In the event of a serious fault, a continuous
tone will sound depending on the settings for parameters P1.7, P1.8, and P1.9. The volume can
be set using the parameters.
13.
HISTORICAL DATA (BATCH PROTOCOLS)
Operating data is recorded while the program is running.
The internal memory is able to save up to 200 programs. If the memory is full, the oldest data is
overwritten.
13.1
Outputting batch protocols retrospectively
Internally stored protocols can be output retrospectively from the machine.
The following options are available for documentation:
To open the menu, press and hold the PRG button
for 5 seconds.
Scroll through the menu using the P1
and P2
buttons and select “History”.
Confirm your selection by pressing START
.
Select the “Print” option using the P1
and P2
buttons and start the printout by
pressing the START
button. “Printing in progress” is shown on the display.
Press the STOP
button to cancel the printout. The menu will be exited.
External software
Data can be retrieved directly via the documentation software.
