Additional settings
84
Renaming a
dispensing
system
If required the name of the dispensing system "
DOS1
" etc. can be
extended to include additional information e.g. "
DOS1 cleaning agent
".
The name "DOS" and the accompanying number cannot be changed.
Document all changes of factory settings in case of a subsequent
Service call.
If the option
–
Change name
has been selected, the display changes to the following view:
Change name
The current name is shown on the second line of the display. This can
be changed using the options shown in the bottom line. The top line
shows which option has been selected from the bottom line.
Names may consist of up to 15 characters including spaces. The
following options are available:
– Letters from
A
to
Z
,
each new word will start with a capital letter.
– Numbers from
0
to
9
.
– Space
.
– Use the
symbol to delete the last position.
– The name is saved when the
OK
symbol in the display is selected.
The display will then revert to the initial menu.
– The
symbol in the display or the
button end the process
without saving the name change. The display reverts to the initial
menu.
Use the arrow buttons
(right) and
(left) to move the cursor to
the option you require.
Confirm each entry with
OK
.
