Problem solving guide
142
Water inlet and drainage
Problem
Possible cause and remedy
Check water intake
One or more taps are turned off.
Turn on the taps.
There was insufficient water in the machine.
Clean the water intake filters.
Turn on the taps fully.
Flow pressure at the water connection is less than 4.4 psi
(30 kPa).
Contact a suitably qualified plumber.
Check drainage
The water drains away slowly or cannot drain away
because ...
... the drain hose is blocked.
Remove any kinks or large loops in the drain hose.
Re-start the program.
- ... the filters in the wash cabinet are blocked.
Cleaning the filters in the wash cabinet.
Danger of injury from glass shards, needles etc.
which are retained in the filter.
Re-start the program.
- ... the drain pump or non-return valve are blocked.
Cleaning the drain pump and non-return valve.
Re-start the program.
- ... the drainage system cannot take sufficient water.
Refer to the information in "Plumbing".
Contact a suitably qualified plumber.
