Maintenance
125
Performance check
Adequate processing performance must be regularly confirmed by
the user.
Test point for
measuring
sensors
On the top of the machine, at the front right under the lid or worktop
is the test point for validation purposes. To gain access to this the lid
of the machine must be removed or the machine must be pulled out
from under the worktop.
Open the door.
Unscrew the fixing screws.
Then remove the safety screws on the back of the machine from
the
lid
and lift the
lid
to remove it.
or
Pull the machine out by approx. 15 cm from under the
worktop
.
