Operation
56
Drying
The additional "Drying" function accelerates the drying process at the
end of the program.
When the drying function is activated and the door is closed, the
drying unit feeds heated and HEPA-filtered air into the wash cabinet
for active drying of the load. The heated air is exhausted via the
steam condenser and can be cooled down if necessary (see "Further
settings / Air cooling").
The drying function can be pre-selected for all programs with a drying
phase or can be retrospectively switched on or off every time a
program is selected (see "Settings
/ Drying").
The drying function is switched on or off by pressing the
button
before starting the program. The LED in the button
will indicate
whether the additional function is switched on or off. The program
drying duration can also be altered.
When the drying function is activated, the program duration will be
longer. However, the drying duration is not calculated in the program
time left shown in the display. It will be displayed during the drying
phase only.
Activating and
deactivating drying
Select a program.
Press the
button before the program start.
If the drying duration (
Drying time
) is set as changeable (
Time
changeable?
) in the program settings, the time set can be altered.
Otherwise the drying duration set is not changeable and can only be
confirmed by touching OK.
If drying is
deactivated
If the drying function has been previously deactivated, it can be
activated by pressing the drying button.
Drying
)
Min
(0 - 120
30
Min
Drying
)
Min
(30 - 30
30
Min
The pre-set drying duration for this program is shown in minutes (min)
in the display. If the drying time is set to being changeable, the
possible setting range is displayed in the bottom line (left-hand
diagram). Otherwise the pre-set drying duration range will be shown
(right-hand diagram).
Alter the drying duration using the arrow buttons
(higher) and
(lower) and save the setting with
OK
to activate drying.
