Miele KWT 6112 iG ed/cs Operating And Installation Instructions Download Page 8 | Manualshive

Page: 8 / 64

background image

Warning and Safety instructions

8



This wine conditioning unit must not be used in a non-stationary

location (e.g. on a ship).



Do not use a damaged wine conditioning unit. It could be danger-

ous. Check the wine conditioning unit for visible signs of damage.



For safety reasons, this wine conditioning unit may only be used

after it has been built in.



The wine conditioning unit must be isolated from the electricity

supply during installation, maintenance and repair work.



Unauthorised installation, maintenance and repairs can cause

considerable danger for the user.
Installation, maintenance and repairs must only be carried out by a
Miele authorised technician.



While the wine conditioning unit is under guarantee, repairs should

only be undertaken by a Miele authorised service technician. Other-
wise the guarantee is invalidated.



Miele can only guarantee the safety of the appliance when genu-

ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.

Correct use



The wine conditioning unit is designed for use within a certain cli-

mate range (ambient temperatures), and should not be used outside
this range. The climate range for your wine conditioning unit is stated
on the data plate inside the appliance. Installing it in a room with too
low an ambient temperature, e.g. a garage, will lead to the wine con-
ditioning unit switching off for longer periods so that it cannot main-
tain the required temperature.



Do not cover or block the air vents as this could impair the effi-

ciency of the appliance, increase the electricity consumption and
could cause damage to the components.

«
...
6
7
8
9
10
...
»

Summary of Contents for KWT 6112 iG ed/cs

































































Reviews:

No comments

Related manuals for KWT 6112 iG ed/cs

Brand: iCES Pages: 34

Brand: La Sommeliere Pages: 89

Signature KS40TL

Brand: Kadeka Pages: 17

Brand: Allavino Pages: 11

Brand: Haier Pages: 36

Brand: Haier Pages: 22

Brand: Haier Pages: 36

Brand: Haier Pages: 24

HVF042BBG - Wine Cellar - 42 Bottled

Brand: Haier Pages: 15

Brand: Haier Pages: 44

Brand: Haier Pages: 11

Brand: Haier Pages: 32

Brand: Haier Pages: 44

Brand: Haier Pages: 32

Brand: Haier Pages: 41

Brand: Haier Pages: 44

Brand: Haier Pages: 87

Brand: Haier Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands