Changing the door hinging
81
Replace panel
onto the soft-close
mechanism from above, clicking it
back into place first at the bottom
and then at the top.
Close the upper door.
Refitting the handle
Danger of damage!
The door seal can be damaged if the
handle is fitted incorrectly.
Please make sure you follow the in-
structions below carefully when you
refit the handle.
Loosely attach the handle to the op-
posite side of the door with the two
front screws
.
The mounting plate
must be posi-
tioned on the door housing so that
when the door is closed it is flush with
the outer wall of the appliance.
Firmly tighten all 4 screws
.
From the appliance side, slide the
sidebar
into the guide on the
mounting plate until it audibly clicks
into place.
Make sure that sidebar
does not
come into contact with the door seal
when the door is opened. This can
cause permanent damage to the door
seal.
