Miele KFN 15842 D edt/cs Page 58 Operating And Installation Instructions Download | Manualshive

Page: 58 / 84

background image

Problem solving guide

58

The interior lighting is not working.

Problem

Cause and remedy

The interior lighting is
not working.

The appliance has not been switched on.



Switch the appliance on.

Sabbath mode

is switched on: the temperature dis-

play is dark and



is shown in the display.



You can switch Sabbath mode off at any time (see
“Selecting additional settings – Switching Sabbath
mode on and off”).

To avoid overheating, the lighting switches itself off
automatically after approx. 15 minutes if the door is
left open. If this is not the case, then there is a fault.



Danger of electric shock.

There are live electrical components under the
lighting cover.
The LED lighting may only be repaired or replaced
by a Miele authorised service technician.



Danger of injury from LED lighting. Light in-

tensity corresponds to laser beam class 1/1M.
The lighting covers must not be removed or dam-
aged, or be removed due to damage. This could
cause injury to your eyes.
Do not look into the LED lighting (laser beam class
1/1M) with optical instruments (e.g. magnifying
glass or similar).



Call Service.

«
...
56
57
58
59
60
...
»

Summary of Contents for KFN 15842 D edt/cs





















































































Reviews:

No comments

Related manuals for KFN 15842 D edt/cs

Brand: Zanussi Pages: 20

Brand: Zanussi Pages: 28

Brand: Zanussi Pages: 20

Brand: Zanussi Electrolux Pages: 20

Brand: Cafe Pages: 80

Brand: VALPRO Pages: 31

Brand: Midea Pages: 11

Brand: Furrion Pages: 36

Brand: BOMANN Pages: 24

Brand: Jacky's Pages: 40

Brand: PARADISE GRILLS Pages: 14

Brand: Magic Chef Pages: 16

Brand: Smeg Pages: 24

Brand: Jocel Pages: 65

Brand: Jocel Pages: 76

Brand: Jocel Pages: 79

Brand: GE Pages: 16

Brand: GE Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands