background image

Using Super cool, Super freeze and DynaCool

28

The following functions are available
depending on section:

Refrigerator section

Super cool 

 and DynaCool 

Freezer section

Super freeze 

See the following pages for more in-
formation on these functions and how
to switch them on.

Super freeze function 

For optimum results switch on the Su-
per freeze function before putting fresh
food into the freezer section. This helps
food to freeze quickly and retain its nu-
trients, vitamins, flavours and appear-
ance.

Exceptions:

– when placing food in the freezer that

is already frozen.

– when freezing up to 2 kg fresh food

daily.

The Super freeze function should be
switched on 

6 hours before placing

food in the freezer section

When freezing the 

maximum amount

of food

 the Super freeze function

should be switched on 

24 hours be-

forehand

.

When Super freeze is switched on, the
appliance will work at full power to
lower the temperature in the appliance.

The Super freeze function will switch it-
self off automatically after approx.
65 hours. The quantity of fresh food
placed in the freezer will determine the
duration before the Super freeze func-
tion turns off.

Tip: 

To save energy, you can manually

switch off Super freeze once the freezer
section reaches a 

constant

 temperat-

ure of -18 °C or colder. Check the tem-
perature in the freezer section.

When Super freeze is switched off, the
appliance will run at normal power
again.

Exceptions:

– when placing food in the freezer that

is already frozen.

– when freezing up to 2 kg fresh food

daily.

The Super freeze function should be
switched on 

6 hours before placing

food in the freezer section

When freezing the 

maximum amount

of food

 the Super freeze function

should be switched on 

24 hours be-

forehand

.

When Super freeze is switched on, the
appliance will work at full power to
lower the temperature in the appliance.

The Super freeze function will switch it-
self off automatically after approx.
65 hours. The quantity of fresh food
placed in the freezer will determine the
duration before the Super freeze func-
tion turns off.

Tip: 

To save energy, you can manually

switch off Super freeze once the freezer
section reaches a 

constant

 temperat-

ure of -18 °C or colder. Check the tem-
perature in the freezer section.

When Super freeze is switched off, the
appliance will run at normal power
again.

Summary of Contents for KFN 15842 D edt/cs





















































































Reviews: