manualshive.com logo in svg

Miele KFN 15842 D edt/cs, Operating And Installation Instructions

Share
Download
Miele KFN 15842 D edt/cs Operating And Installation Instructions Download Page 65

Installation

65

Fitting wall spacers supplied

The wall spacers supplied must be
used in order to achieve declared en-
ergy consumption values and to pre-
vent the build-up of condensation at
high ambient temperatures. Appliance
depth is increased by approx. 35 mm
with the wall spacers fitted. If the wall
spacers are not used the functionality
of the appliance is not affected. En-
ergy consumption is only slightly in-
creased with less distance between
the appliance and the wall.

Installation

Two people are required for in-

stalling the appliance.

The appliance must be empty

when it is installed.

Move the appliance carefully on

floors that are sensitive to scratching
to prevent damage.

For easier installation there are trans-
port handles on the back at the top
and transport wheels underneath the
appliance.

Prepare the appliance for installation
as close as possible to its intended
installation location.

Release the mains cable from the
back of the appliance.

Remove the cable clip from the back
of the appliance.

Move the appliance carefully to its in-
tended installation location.

Position the appliance with the wall
spacers (if used) or the back close to
the wall.

Summary of Contents for KFN 15842 D edt/cs





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands