Using Super cool, Super freeze and DynaCool
29
Super cool function
The Super cool function can be used to
rapidly reduce the temperature in the
refrigerator section to its lowest setting
(depending on the room temperature).
Tip:
Super cool is particularly recom-
mended for the rapid chilling of large
amounts of fresh food or drink.
When Super cool is switched on, the
appliance will work at full power to
lower the temperature in the appliance.
It switches itself off automatically after
approx. 12 hours.
Tip:
To save energy, you can switch the
Super cool function off yourself once
food and drinks are sufficiently chilled.
After switching Super cool off the appli-
ance reverts to working at normal
power.
DynaCool function
When the DynaCool function is not
switched on, the natural circulation of
air in the appliance will cause different
temperature zones in the refrigerator as
the cold, heavy air will sink to the low-
est section of the appliance. You should
bear this in mind when placing food in
the appliance (see “Storing food in the
refrigerator section”).
However, if you are placing a large
amount of food in the refrigerator at any
one time, (e.g. after the weekly shop) it
is a good idea to switch DynaCool on.
This way you can distribute the temper-
ature inside the appliance to all areas
more evenly so that all the food will be
chilled to about the same degree.
The temperature is set as normal.
DynaCool should also be selected
when:
– the ambient temperature in the room
is high (above approx. 30 °C), and
– the room humidity level is high.
With DynaCool switched on, the fan is
ready: when the compressor switches
on, the fan also switches on automat-
ically.
Tip:
Because DynaCool requires more
energy, you should switch it off under
normal conditions.
To save energy, the fan switches off
automatically whilst the door is open.
