Miele KF 1803 SF Page 5 Operating And Installation Instructions Download | Manualshive

Page: 5 / 84

background image

Installation

This appliance is top-heavy and
must be secured to prevent the
possibility of tipping forward.
Keep the doors closed until the
appliance is completely installed
and secured per the installation
instructions.

~

This appliance must be installed

and connected in compliance with the
installation instructions.

~

Installation and repair work should

be performed by a Miele authorized
service technician. Work by unqualified
persons could be dangerous and may
void the warranty.

~

Installation must comply with local

plumbing regulations and state laws.

~

Do not operate any appliance with a

damaged cord or plug, or if the
appliance has been damaged in any
manner. Contact Miele’s Technical Ser-
vice Department.

~

This appliance must not be used in

a non-stationary location (e.g. on a
ship).

~

Do not install the fridge/freezer in a

room with too low an ambient
temperature, e.g., a garage, as this
may lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.

~

The ice cube maker is not suitable

for connection to a hot water supply.

~

In refrigerators with an automatic ice

maker, avoid contact with the moving
parts of the ejector mechanism, or with
the heating element located on the
bottom of the ice maker. Do not place
fingers or hands on the automatic ice
making mechanism while the
refrigerator is plugged in.

~

Do not use water that is

microbiologically or chemically unsafe
or of unknown quality without adequate
disinfection or other treatment before or
after the filter is used; the filter alone is
not an adequate safeguard.

Use

~

This appliance is not designed for

commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as:

– shops, offices and similar work

environments

– by customers in hotels, motels, Bed

& Breakfasts or similar residential
environments.

~

This appliance is not intended for

outdoor use.

~

Persons who lack physical, sensory

or mental abilities, or experience with
the machine should not use it without
supervision or instruction by a
responsible person.

~

To reduce the risk of injury, do not

allow children to play in, on or near the
appliance, especially in the door hinge
area.

IMPORTANT SAFETY INSTRUCTIONS

5

«
...
3
4
5
6
7
...
»

Summary of Contents for KF 1803 SF





















































































Reviews:

No comments

Related manuals for KF 1803 SF

Brand: GE Pages: 20

Brand: V-ZUG Pages: 52

Brand: Gaggenau Pages: 82

Brand: U-Line Pages: 56

Brand: NEFF Pages: 28

Brand: Hoshizaki Pages: 30

Brand: Scandomestic Pages: 53

Brand: Marvel Pages: 18

Brand: Philco Pages: 36

Brand: U-Line Pages: 60

Essentials BE-LGLT800P531

Brand: Best Buy Pages: 2

Brand: Zanussi Pages: 24

Brand: Zanussi Pages: 48

Brand: Zanussi Pages: 56

Brand: Zanussi Pages: 16

Brand: Continental Refrigerator Pages: 2

Brand: LG Pages: 35

GC-F411ELDM.APZPEAL

Brand: LG Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands