Miele KF 1803 SF Page 54 Operating And Installation Instructions Download | Manualshive

Page: 54 / 84

background image

Have the appliance installed by a
qualified technician, according to
the enclosed installation
instructions.

,

WARNING

This appliance is top-heavy and
must be secured to prevent it from
tipping forward.
Keep the doors closed until the
appliance is completely installed
and secured as per the installation
instructions.

Empty weight of your machine:

KF 18X3 SF

. . . . . . . . 511 lbs (232 kg)

KF 19X3 SF

. . . . . . . . 562 lbs (255 kg)

Climate Range

The appliance is designed for use
within certain climate ranges (ambient
temperatures) and should not be used
outside this range. The climate range of
this appliance is stated on the data
plate inside the appliance.

Climate

range

Ambient room temperature

SN

N

ST

T

+50°F (10 °C) to +90°F (32 °C)
+60°F (16 °C) to +90°F (32 °C)
+60°F (16 °C) to +100°F (38 °C)
+60°F (16 °C) to 110°F (43 °C)

Operating in a room which is too cold
will cause the compressor to switch off
for too long, causing the internal
temperature in the appliance to rise
with the risk of food deteriorating and
going off.

Installation site

The appliance should be installed in a
dry, well-ventilated room.

Do not install the appliance:
- outdoors
- in an environment with dripping

water

- in rooms that are at risk of frost.

The installation location should not be
exposed to direct sunlight, nor near a
heat source, such as an oven,
radiator, etc.

The ambient temperature should not
drop below 55°F (13°C) or rise above
110°F (43°C), otherwise malfunctions
may occur.

If installation next to a heat source is
unavoidable observe the following
minimum distances from the heat
source:

– 1

1

/

4

" (3 cm) from an electric cooktop

or electric oven.

– 12" (30 cm) from a gas or oil

cooktop, range or oven.

The following should also be taken into
consideration:

– The electrical outlet must be easily

accessible in case of an
emergency,not concealed behind
the appliance.

– The plug and cord must not touch

the rear of the appliance as they
could be damaged by vibrations
from the appliance.

– Do not plug in other devices behind

this appliance.

Installation

54

«
...
52
53
54
55
56
...
»

Summary of Contents for KF 1803 SF





















































































Reviews:

No comments

Related manuals for KF 1803 SF

Brand: Samsung Pages: 376

Brand: Samsung Pages: 86

Brand: Maytag Pages: 36

Brand: BERJAYA Pages: 10

Brand: Maytag Pages: 66

Brand: German pool Pages: 27

Brand: Kuppersbusch Pages: 56

Brand: Tricity Bendix Pages: 20

Brand: Hotpoint Pages: 2

Brand: Perlick Pages: 8

Brand: Flavel Pages: 12

Brand: Activision Pages: 18

Brand: Hanseatic Pages: 66

Brand: Zanussi Pages: 19

Brand: Zanussi Pages: 14

Brand: Zanussi Pages: 16

Brand: Zanussi Pages: 20

Brand: Zanussi Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands