Miele KF 1803 SF Page 49 Operating And Installation Instructions Download

Page: 49 / 84

Normal noises

What causes them?

Brrrrr...

A humming noise is made by the motor (compressor). This
noise can get louder for brief periods when the motor
switches on.

Blub, blub....

A gurgling noise can be heard when the coolant circulates
through the pipes.

Click....

Clicking sounds occur whenever the thermostat switches the
motor on or off.

Sssrrrrr....

In multi-section and frost-free appliances, the movement of
air circulating through the appliance can sometimes just
barely be heard.

In appliances with a water tank, a humming noise can be
heard when the water pump is running.

Crack...

A cracking noise can be heard when the appliance materials
expand.

Please bear in mind that a certain amount of noise is unavoidable (from the
compressor and the coolant circulating through the system).

Noises that you
can easily
eliminate

Possible cause

Remedy

Rattling, clinking

The appliance is not level.

Realign the appliance using a
spirit level, by raising or
lowering the screw feet
underneath the appliance.

The appliance is touching
another appliance or piece of
furniture.

Move it away.

Drawers, baskets or shelves
are jiggling or are stuck.

Check all removable items
and refit them correctly.

Bottles or containers are
touching.

Separate them.

The transport cable clips are
still hanging on the back of the
appliance.

Remove the cable clips.

Causes of noises

Summary of Contents for KF 1803 SF





















































































Search results

Summary of Contents for KF 1803 SF

Reviews:

Related manuals for KF 1803 SF

Brands by name

Popular brands

Miele KF 1803 SF, Operating And Installation Instructions

Search results

Summary of Contents for KF 1803 SF

Reviews:

Related manuals for KF 1803 SF

Brands by name

Popular brands