Miele KF 1803 SF Page 34 Operating And Installation Instructions Download

Page: 34 / 84

After cleaning

Return all shelves and accessories.

Place food back in the refrigerator
section, close the appliance doors,
insert the plug in the power outlet
and turn the appliance on.

Switch on the SuperCool function for
the freezer section. The freezer
section will cool down quickly.

Once the temperature in the freezer
section is cold enough, place food in
the freezer baskets and return them
to the freezer.

Changing the light bulb

The lighting automatically switches off
after the door has been open for
approx. 5 minutes. This is not a fault.

After the bulb has cooled for a short
time it will turn on again.

If the light does not come on when the
door is opened briefly, the light bulb
should be changed.

Use the main switch to turn the
appliance off.

To reduce the risk of electric shock,
disconnect the appliance from the
power supply by unplugging or
tripping the circuit breaker.

Upper lighting

Grasp the front of the light cover with
both hands, and slide it back.

Carefully pull the cover forward and
out.

Cleaning and care

Summary of Contents for KF 1803 SF





















































































Search results

Summary of Contents for KF 1803 SF

Reviews:

Related manuals for KF 1803 SF

Brands by name

Popular brands

Miele KF 1803 SF, Operating And Installation Instructions

Search results

Summary of Contents for KF 1803 SF

Reviews:

Related manuals for KF 1803 SF

Brands by name

Popular brands