Problem solving guide
134
Problem
Cause and remedy
The oven does not heat
up.
Demo mode has been activated.
The oven can be operated but does not heat up.
Deactivate demo mode. See "Settings -
Showroom programme".
Power cut - process
cancelled
appears in the
display.
There has been a power cut which has caused a
current process to stop.
Switch the oven off and then back on again.
Start the programme again.
12:00
has appeared in
the display.
The power supply was interrupted for longer than 200
hours.
Reset the time and date.
Maximum operating duration
reached
appears in the
display.
The oven has been operating for an unusually long
time and this has activated the safety switch-off
function.
Confirm with
OK
. Touch
to delete the message
Process finished
.
The oven is now ready to use.
Fault XX
appears in
the display
There is a problem that you cannot resolve.
Call Miele Service.
Door not locked
appears
in the display.
The Pyrolytic cleaning programme door lock is not
locking.
Switch the oven off and then back on again. Then
restart the Pyrolytic cleaning programme.
If the message appears again, call Miele Service.
Door not released
appears
in the display.
The door lock for the Pyrolytic cleaning programme is
not being released.
Switch the oven off and then back on again.
If the door lock still does not deactivate itself,
contact Miele.
No signal to food probe.
Reposition food probe in the
oven.
appears in the
display.
The food probe is no longer recognised by the oven.
Reposition the food probe in the food.
If the oven still does not recognise the food probe it
must be faulty. A replacement food probe can be
ordered from Miele or from your Miele dealer.
Summary of Contents for HR 1956
Page 22: ...Overview Range Cooker 22 ...
Page 145: ......
Page 146: ......
Page 148: ...M Nr 10 754 320 00 en GB HR1956 ...