Using the gas cooktop
47
Switching on the burner
Do not turn the control knob clockwise
past the
Off
position.
When a control knob is activated, a
spark is developed automatically on all
burners. This is normal and does not
indicate a fault.
You may notice a brief re-ignition (1–
2 clicks) when turning on the
appliance, e.g., because of a draft.
Push in the control knob for the
burner required and turn it
counterclockwise to
High
.
The ignitor “clicks” and ignites the gas.
If the burner fails to ignite, turn the
control knob to the
Off
position.
Aerate the room or wait at least
1 minute before trying again.
If the burner does not ignite the
second time, turn the control knob
back to
Off
and see “Frequently
asked questions”.
Switching on during a power
failure
If there has been a power failure,
the automatic re-ignition feature will
not work properly.
Operate the cooktop only under
supervision. If the burner has not
ignited or the flame goes out, turn
the control knob to
Off
.
Normal and power burners
In case of a power failure, the flame
can be ignited manually.
Push in the control knob and turn it
counterclockwise to
High
.
Light the emerging gas/air mixture
with a match.
Grill
Danger of injury caused by
manually igniting the burner during a
power failure!
Never operate the grill during a
power failure.
Turn the grill control knob to
Off
.
Griddle plate
Danger of injury caused by
manually igniting the burner during a
power failure!
Never operate the griddle plate
during a power failure.
Turn the control knob for the griddle
plate to
Off
.
Adjusting the flame
The burners can be variably adjusted
between the lowest and highest flame
settings.
Summary of Contents for HR 1934-3 DF
Page 125: ......
Page 126: ......
Page 128: ...M Nr 11 919 030 03 en US CA HR 1934 3 DF HR 1935 3 DF HR 1936 3 DF ...