Miele HR 1934-3 DF Operating Instructions Manual Download Page 29

Page: 29 / 128

Controls for the range

The knobs are illuminated with a light ring.

The control knob for each burner is used to ignite the burner and regulate the
strength of the flame. The burners can be variably adjusted between the lowest
and highest flame settings.

Control knobs for normal and power burners

Label

Description

Off

Gas supply off: burner off

High

Strongest flame setting:
Maximum power of upper and lower flame rings

Simmer

Weakest flame setting:
Upper flame ring off
Minimum power of lower flame ring

Control knob for grill

The range HR 1935-3 DF has a grill. The grill is heated by means of a
thermostatically controlled ceramic burner.

Label

Description

Off

Gas supply off: grill off

High

Highest power level

Low

Lowest power level

Control knob for griddle plate

The range HR 1936-3 DF has a griddle plate. The griddle plate is heated by means
of a thermostatically controlled ceramic burner.

Label

Description

Off

Gas supply off: griddle plate off

Low

Lowest power level



Medium power level

High

Highest power level

* The symbol without a label indicates a medium power level.

Summary of Contents for HR 1934-3 DF

































































































































Search results

Summary of Contents for HR 1934-3 DF

Reviews:

Related manuals for HR 1934-3 DF

Brands by name

Popular brands

Miele HR 1934-3 DF, Operating Instructions Manual

Search results

Summary of Contents for HR 1934-3 DF

Reviews:

Related manuals for HR 1934-3 DF

Brands by name

Popular brands