Miele HR 1934-3 DF, Operating Instructions Manual

Page: 35 / 128

Using the appliance
35
You operate the oven via the touch
display by tapping the menu option you
want.
Each time you tap a possible option,
the relevant characters (word and/or
symbol) will light up
orange .
Fields for confirming an operating step
are highlighted in
green (e.g., OK ).
Selecting a menu option

Tap the field or value you want on the
display.
Scrolling
You can scroll left or right.

Swipe across the screen. To do this,
place your finger on the touch display
and swipe it in the desired direction.
The bar at the bottom shows you where
you are in the current menu.
Exiting a menu
 Tap the Back sensor button or tap the
…  symbol in the menu path.

Tap the

symbol to switch to the
start screen.
Entries made before this which have not
been confirmed with
OK will not be
saved.
Changing a value or setting
Changing a setting in a list
The current setting is highlighted in
orange.

Tap the desired setting.
The setting is now saved. This will take
you back to the previous menu.
Entering numbers with the roller
 Swipe the roller up or down until the
desired value is displayed in the
center.

Confirm with OK .
The changed number is now saved.
Entering numbers using the
numerical keypad

Tap on the value that is in the middle
of the numerical keypad.
The numerical keypad appears.
 Tap the required numbers.
As soon as you enter a valid value, OK
will turn green.
Use the arrow to delete the last entered
number.

Confirm with OK .
The changed number is now saved.
Changing the setting with a segment
bar
Some settings are represented by a
       bar made up of segments.
If all of the segments are illuminated,
the maximum value is selected.
If none of the segments are illuminated
or if only one is, the minimum value is
selected or the setting is turned off
altogether (e.g., audible signals).

Tap the corresponding segment on
the segment bar to change the
setting.

Select On or Off to turn the setting on
or off.

Confirm your selection with OK .
The setting is now saved. This will take
you back to the previous menu.