Miele HR 1934-3 DF, Operating Instructions Manual

Page: 49 / 128

Using the gas cooktop
49
Tips for grilling

Risk of fire!
Do not leave the appliance
unattended while cooking.
- Always preheat the grill for
10 minutes before use. Select the
setting that you are going to cook
with.
- Pat wet food dry with a paper towel
to avoid spitting when grilling.
- To prevent meat drying out, do not
season with salt until after it has been
grilled.
- Select lean meat or cut the fat off
prior to grilling. Drops of fat can
ignite.
- If drops of fat ignite, use long
barbecue tongs to immediately move
the food to another area of the grill or
remove it completely.
- Remove the skin from chicken
breasts and thighs to minimize flare-
ups.
- Cover the food with the marinade
halfway through grilling.
- Leave the grill on for approx.
10 minutes after you have finished
grilling. This will make the grill easier
to clean once it has cooled down.
The grill is heated by means of a
ceramic burner which transfers intense
heat to the food. Searing helps to keep
juices in the meat. The temperature of
the grill can be variably adjusted
between the lowest and highest flame
settings.
The grill and griddle plate will be
switched off as soon as you start the
Self Clean program on the oven.
The grill and griddle plate cannot be
turned on during Self Clean.
Using the griddle plate
During heating, an LP gas griddle
plate can emit a buzzing or growling
sound. This is not an error.
Switching on the griddle plate
Always observe USDA food safety
guidelines.

Push in the griddle plate control knob
and turn it counterclockwise to
Low
until the burner ignites.

If the burner fails to ignite, turn the
control knob to the
Off position.
Aerate the room or wait at least
1 minute before trying again.

If the burner does not ignite the
second time, turn the control knob
back to
Off and see “Frequently
asked questions”.
 Preheat the griddle plate for approx.
20 minutes.
 Set the power level you want.