manualshive.com logo in svg

Miele G 6920, Operating Instructions Manual, Page: 99 / 112

Share
Download
Miele G 6920 Operating Instructions Manual Download Page 99

Settings menu

99

WPS Push Button

As an alternative to networking your
dishwasher via the Miele@mobile App
we recommend using WPS (Wireless
Protected Setup). To do so you will
need a WPS-compatible router.

Select the 

WPS push button

 option.

Please wait...

 will appear in the display.

Activate the "WPS" function on your
router within two minutes.

Once connection has been made,
confirm the message with 

OK

.

The dishwasher will then revert to the

Miele@home

 menu.

If the connection fails, you have prob-
ably not connected WPS to your router
quickly enough. Repeat the steps
above.

SmartStart

The 

SmartStart

 function is used for start-

ing your dishwasher automatically at a
time when your energy costs are most
economical.

Once 

SmartStart

 

Permitted

 has been ac-

tivated, the 

Delay start

 menu for the pro-

gramme selected will no longer show
the 

EcoStart

 option. Instead 

SmartStart

will appear in the display. The dish-
washer will then start within a timeframe
set by you once it receives the signal
from your energy provider. 
If it has not received a signal from your
energy provider by the latest start time
set, the dishwasher will start automatic-
ally.

Select the setting you want and con-
firm with 

OK

.

Confirm the message with 

OK

.

Summary of Contents for G 6920

















































































































Reviews:

No comments