manualshive.com logo in svg

Miele G 6920, Operating Instructions Manual, Page: 6 / 112

Share
Download
Miele G 6920 Operating Instructions Manual Download Page 6

Guide to the appliance

6

Control panel

a

On/Off Sensor 

 

For switching the dishwasher on and
off.

b

Information sensor

 

For displaying additional information
about the option in the display.

c

Sensor controls

For selecting the option marked with
a dash listed next to the sensor.
For selecting a programme.
For altering values displayed.
For navigating to further screens.
The sensor controls light up when
active.

d

Display

See "Display" for further information.

e

Back sensor 

 

For navigating back to the previous
menu or deleting values which have
been set previously.

f

Start

 

Sensor

For starting the selected programme.

This instruction book applies to several different dishwasher models. 
The specific dishwasher models are referred to as follows: 
Standard = 80.5 cm high dishwashers (integrated) 
and 84.5 cm high dishwashers (freestanding) 
XXL = 84.5 cm high dishwashers (integrated).

Summary of Contents for G 6920

















































































































Reviews:

No comments