manualshive.com logo in svg

Miele G 6920, Operating Instructions Manual, Page: 73 / 112

Share
Download
Miele G 6920 Operating Instructions Manual Download Page 73

Problem solving guide

73

General problems

Problem

Cause and remedy

The display is dark.

The display has switched off automatically to save
energy.

Switch the dishwasher back on using the 

sensor.

The interior lighting
does not come on when
the door is opened.

The lighting has been switched off permanently.

Switch the lighting back on again (see "Settings
menu, BrilliantLight").

The following fault
shows in the display:

 

Salt reservoir lid

During a programme
the warning buzzer will
also sound and the pro-
gramme will be can-
celled.

The salt reservoir lid has not been closed properly.

Close the salt reservoir lid.

If the salt reservoir lid has opened during a pro-
gramme:

Switch the dishwasher off and back on again with
the 

 sensor.

Close the salt reservoir lid.

Start the programme again.

Detergent residue is left
in the dispenser at the
end of a programme.

The dispenser was still damp when detergent was ad-
ded.

Make sure the dispenser is dry before adding de-
tergent.

The detergent dis-
penser lid cannot be
closed properly.

Clogged detergent residue is blocking the catch.

Clean the detergent from the catch.

At the end of a pro-
gramme there is a film
of moisture on the in-
side of the door and the
interior walls.

This is caused by the drying system and does not in-
dicate a fault. The moisture will dissipate after a
while.

Summary of Contents for G 6920

















































































































Reviews:

No comments