manualshive.com logo in svg

Miele G 6920, Operating Instructions Manual, Page: 26 / 112

Share
Download
Miele G 6920 Operating Instructions Manual Download Page 26

Before using for the first time

26

Add salt reminder

When 

 

Insufficient salt

 appears in the

display wait until the end of the pro-
gramme and then refill the salt reser-
voir.

Confirm with 

OK

.

The message will go out.

Risk of corrosion. 

Immediately after filling the salt
reservoir, run the 

QuickPowerWash

programme with the 

Short

 pro-

gramme option selected and without
any crockery in the dishwasher to re-
move any traces of salt from the cab-
inet.

After the salt reservoir has been filled,
the refill reminder may still appear in the
display if the salt concentration has not
yet reached the correct level. If this is
the case, confirm again with 

OK

.

The refill reminder will be switched off if
you have programmed the dishwasher
for a water hardness below 0.9 mmol/l
(5 °d - German scale).

If you only ever use combination
products containing salt and rinse aid
in your dishwasher, you can switch the
reminders off if you wish (see "Set-
tings menu, Refill reminders").

If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add salt
and rinse aid and to switch the re-
minders back on.

Summary of Contents for G 6920

















































































































Reviews:

No comments