manualshive.com logo in svg

Miele G 6920, Operating Instructions Manual, Page: 69 / 112

Share
Download
Miele G 6920 Operating Instructions Manual Download Page 69

Problem solving guide

69

Problem

Cause and remedy

The buzzer is sounding.
One of the following
fault messages appears
in the display:

Before rectifying the problem:

Switch the dishwasher off using the 

 sensor.

 

Technical fault FXX

There may be a technical fault.

After a few seconds:

Switch the dishwasher back on.

Select the programme you want.

Press the 

Start

 sensor.

If the fault message appears again, there is a tech-
nical fault.

Call the Miele Service Department.

 

Waterproof fault

The Waterproof system has reacted.

Close the stopcock.

Call the Miele Service Department.

 

Technical fault F78

A fault has occurred in the circulation pump.

Switch the dishwasher off for at least 30 seconds
with the 

 sensor.

Switch the dishwasher back on.

Select the programme you want.

Press the 

Start

 sensor.

If the fault message appears again, there is a tech-
nical fault.

Call the Miele Service Department.

Summary of Contents for G 6920

















































































































Reviews:

No comments